/
How to restore the structure using History
This article is for Data Center. Visit Cloud
How to restore the structure using History
There may be times when you need to restore a structure to some previous state. You can do so using the History panel.
To restore a structure using History:
- Delete all current items in the structure before restoring its previous version from the history.
- Open the structure History panel.
- In the history, find and select the moment when the structure was in the desired state (before the unwanted changes took place).
- Press CTRL+A (⌘+A on Macs) to select all issues and press CTRL+C (⌘+C) to cut them to clipboard.
- Switch off history panel and press CTRL+V (⌘+V) – this should rearrange the structure according to the view you selected in the history.
If you have some complicated synchronizers (for example, ones which use S-JQL in their configuration), we recommend temporarily disabling the synchronizers before restoring. After the restore is finished, you can enable them and run the resync.
, multiple selections available,
Related content
Undoing Changes
Undoing Changes
More like this
Restoring Structure from Backup
Restoring Structure from Backup
More like this
Undoing Changes
Undoing Changes
More like this
Undoing Manual Adjustments
Undoing Manual Adjustments
More like this
Undo Synchronizer Actions
Undo Synchronizer Actions
More like this
Deleting a Structure
Deleting a Structure
More like this